Xerox Wide Format 6050 Скачать руководство пользователя страница 177

Страница: 177 / 304

TIFF Option

Sets up the sorting and output sequence, and the resolution priority for TIFF data.

Settings

The settings for this function are as follows.

These settings are only valid with TIFF data.

Menu Item

Description

Sort mode

Determines whether or not to sort the output data.
The default setting is

[DISABLE]

[

ENABLE

]

Sorted.

[

DISABLE

]

Not sorted.

Last to first

Determines whether or not to print in the reverse order.
The default setting is

[DISABLE]

[

ENABLE

]

Prints in the reverse order.

[

DISABLE

]

Prints in the normal order.

Resolution
priority

Sets the resolution priority.
The default settings is

[JOB]

[

JOB

]

Uses the resolution embedded in the TIFF data.

[

CONTROLLER

]Uses the resolution set here.

Controller
Resolution

Sets the resolution within a range of 30 to 3000 (dpi) when the
[

CONTROLLER

] parameter has been specified.

Содержание Wide Format 6050

















































































































































































































































































































Результаты поиска

Содержание Wide Format 6050

Отзывы:

Xerox Wide Format 6050, Руководство пользователя, Страница: 177 / 304

Результаты поиска

Содержание Wide Format 6050

Отзывы: