background image

Illegal Copies and Printouts

USA

Congress, by statute, has forbidden the reproduction of the following subjects 
under certain circumstances. Penalties of fine or imprisonment may be imposed on 
those guilty of making such reproductions.

1. Obligations or Securities of the United States Government, such as:

Certificates of Indebtedness

National Bank Currency

Coupons from Bonds

Federal Reserve Bank Notes

Silver Certificates

Gold Certificates

United States Bonds

Treasury Notes

Federal Reserve Notes

Fractional Notes

Certificates of Deposit

Paper Money

Bonds and Obligations of certain agencies of the government, such as FHA, etc.

Bonds

. (U.S. Savings Bonds may be photographed only for publicity purposes in 

connection with the campaign for the sale of such bonds.)

Internal Revenue Stamps

. (If it is necessary to reproduce a legal document on 

which there is a canceled revenue stamp, this may be done provided the 
reproduction of the document is performed for lawful purposes.)

Postage Stamps

, canceled or uncanceled. (For philatelic purposes, Postage 

Stamps may be photographed, provided the reproduction is in black and white and 
is less than 75% or more than 150% of the linear dimensions of the original.)

Postal money Orders

.

Bills, Checks

, or Draft of money drawn by or upon authorized officers of the United 

States.

Содержание Wide Format 6050

















































































































































































































































































































Отзывы: