Xerox Wide Format 6050 Скачать руководство пользователя страница 239

Страница: 239 / 304

Enter the password of the user logged in at Step

If the user information registered in the

Xerox 6030/6050 Wide Format

matches the logged-in user password, the login acceptance message is

displayed.

Specify a logical printer (example: plt00h). Enter the logical printer

name using the cd subcommand.

A message indicating that the logical printer has been set will be displayed.

Specify the bin subcommand for a data format.

Enter a print file name (example: kikai_01.hp) using the send or put

subcommand.

A message indicating that the transferred port has been set will be

displayed. A message indicating the file name, and a message indicating

the transfer data volume and time depend on the client-side application.

Password:

230 User logged in

ftp>

The password of the user (ftpusr) is

[

ftpusr

]

at shipping.

ftp>

cd plt00h

250 Changed directory to "/ata0-p1/plt00h"

ftp>

bin

200 Type set to A, bin mode

ftp>

The ascii subcommand can be specified only for HP-GL data.

Specify the bin subcommand for HP-GL/2, HP-RTL, Versatec, TIFF, and CALS

data. The bin subcommand can also be specified for HP-GL data.

ftp>

sendplans_01.hp

200 Port set okay

150 Opening ASCII mode data connection

226 Transfer complete

local: plans_01.hp remote: plans_01.hp

17720 bytes sent in 0.14 seconds (1.2e+02 Kbytes/s)

ftp>

Содержание Wide Format 6050

















































































































































































































































































































Результаты поиска

Содержание Wide Format 6050

Отзывы:

Xerox Wide Format 6050, Руководство пользователя, Страница: 239 / 304

Результаты поиска

Содержание Wide Format 6050

Отзывы: