![background image](http://html2.mh-extra.com/html/xerox/versant-80-press/versant-80-press_system-administration-manual_3325888054.webp)
• Standard Finisher Plus (with or without C/Z Folder) plus a Third-party, DFA finishing
device (attached to the Standard Finisher Plus)
One or both of the following options will be available:
• Adjust Fold Position: Use this option for adjusting the fold position of the output.
You can adjust the fold position for various paper types, as well as set adjustment
values for a maximum of 10 default types. Furthermore, a set type can be assigned
to each tray. Fold position adjustments can be set for single fold and booklet. In
addition, if the optional C/Z Folder is connected, fold positions can be set for C fold,
Z fold, and Z fold half sheet.
• DFA Finisher Profiles (for Third-Party Finishing Devices): Use this option to create a
new or make changes/additions to an existing DFA profile for the attached third-party
device.
Note
For information about the DFA settings to enter for the device, refer to the third-party
DFA Finisher documentation.
Adjust Fold Position
Adjust Fold Position Overview
Use this option for adjusting the fold position of the output. You can adjust the fold
position for various paper types, as well as set adjustment values for a maximum of 10
default types. Furthermore, a set type can be assigned to each tray. Fold position
adjustments can be set for single fold and booklet. In addition, if the optional C/Z Folder
is connected, fold positions can be set for C fold, Z fold, and Z fold half sheet.
Adjusting the Fold Position
1. Load paper in the desired tray.
2. Log in as the administrator.
3. Press the Machine Status button on the UI.
4. Select the Tools tab.
5. Select System Settings > Common Service Settings .
6. Select Maintenance > Finisher Adjustment
7. Select Adjust Fold Position.
8. Select Fold Position Type Setup, and select Change Settings.
9. Select the paper fold position type you want to set or adjust, and select Change
Settings.
10. Select Name and select Change Settings.
11. Enter the desired type name, and select Save.
Note
The recommendation is to use a name such as Single Fold Plain that allows you to
recall what the content of that fold type is.
Xerox
®
Versant
®
80 Press
4-24
System Administration Guide
System Settings (Tools Administrator Mode)
Содержание Versant 80 Press
