Xerox Versant 80 Press, Руководство системного администратора

Страница: 16 / 230

The previous screen displays.
11. Select Save again.
The Screen / Buttons Setting window displays.
12. Select Close.
The main Tools screen displays.
13. Exit the administrator mode.
Adding Stored Programming to the Home Screen
1. Log in as the administrator.
2. Press the Machine Status button on the UI.
3. Select the Tools tab.
4. Select System Settings > Common Service Settings .
5. Select Screen / Button Settings.
6. Select Services Home from the displayed list.
7. Select Change Settings.
8. From the displayed list, select the position where you want to assign the Stored
Programming service.
9. From the Main Feature Selection screen, select the Stored Programming service.
10. Select Save.
The previous screen displays.
11. Select Save again.
The Screen / Buttons Setting window displays.
12. Select Close.
The main Tools screen displays.
13. Exit the administrator mode.
Energy Saver Mode
Energy Saver Overview
The Energy Saver feature allows the press to enter a reduced power consumption mode
when all print jobs have completed and there are no jobs currently processing. There
are two energy saving modes: Low Power and Sleep.
By default, the press automatically enters the Low Power mode after 1 minute of
inactivity. After 1 minute of inactivity, the press then enters Sleep mode. These time
intervals for both modes can be changed by the system administrator.
Here are two examples:
• If Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes, Sleep
Mode activates after 60 minutes of total inactivity, not 60 minutes after Low Power
Xerox ® Versant ® 80 Press 1-4
System Administration Guide
System Administrator Overview