Xerox Secure Access Unified ID System, Руководство по установке

Страница: 8 / 36

Safety Notes
Xerox Secure Access Installation Guide 8
Europe
WARNINGS:
• In order to allow this equipment to operate in proximity to Industrial Scientific and
Medical (ISM) equipment, the external radiation from the ISM equipment may have to be
limited or special mitigation measures taken.
• Shielded interface cables must be used with this product to maintain compliance with
Council Directive 89/336/EEC.
"Regulatory information for RFID"
Readers provide with this product generates 13.56 MHz using an Inductive Loop System as a Radio
Frequency Identification device (RFID). This RFID device complies with the requirements specified in
FCC Part 15, Industry Canada RSS-210, European Council Directive 99/5/EC, and all applicable local
laws and regulations.
Operation of this device is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications to this equipment not specifically approved by the Xerox Corporation may
void the user’s authority to operate this equipment.
The CE mark applied to this product symbolizes XEROX’s declaration of
conformity with the following applicable Directives of the European Union, as of
the dates indicated:
December 12, 2006:
Council Directive 2006/95/EC as amended. Approximation of the laws of the
member states related to low voltage equipment.
December 15, 2004:
Council Directive 2004/108/EC as amended. Approximation of the laws of the
member states related to electromagnetic compatibility.
March 9,1999:
Council Directive 99/5/EC, on radio equipment and telecommunications terminal
equipment and the mutual recognition of the conformity.
A full declaration of conformity, defining the relevant directives and referenced standards, can be
obtained from your XEROX Limited representative.