Xerox Secure Access Unified ID System, Руководство по установке

Страница: 30 / 36

Setting Up the Secure Access Hardware
Xerox Secure Access Installation Guide 30
6. Change the password used to access the Web Admin tool. You can reset the password at any time,
but ensure that you change the password from the default setting before the Secure Access system
is up and running.
7. In the Configure Xerox Secure Access Authentication Device section, choose Static IP from the
Addressing mode
field.
8. Enter a static IP address in the
IP Address
field to set the address of this Authentication Device.
9. In the
Configure Server
section, enter the DCE Server’s IP Address in the Server IP Address field.
10. Click the
Update Configuration
button located below the Configure Server fields.
11. Click the
Restart
link at the top of the page, then click "Click here to confirm restart" to restart the
terminal.
Repeat these instructions for each Secure Access Authentication Device that you are deploying.
Note: Remember to reconfigure the laptop Internet Properties when you are done.