Xerox Secure Access Unified ID System, Руководство по установке

Страница: 24 / 36

Installing the Secure Access Server
Xerox Secure Access Installation Guide 24
9. Specify a UserID and Password for services in the User Name for Services screen.
When deploying the components on more than one machine, you MUST enter the same user
credentials for each install. These credentials are used to start and run all services. If you fail to
enter the same credentials on all components, the Core Authentication Server will not respond to
requests by the DCE or DRE.
Domain accounts must use the domain name (for example, domain\username).
Although this account does not require Administrative privileges on the Secure Access Server, the
account must have Print Operator privileges to allow the DRE to process print requests.
10. Enter the name of the Xerox Secure Access Authentication Server.
When you launch the Secure Access Manager, you need to identify the Core Authentication Server
by the name you enter here.
11. Click
Install
to start the installation process. The installation wizard copies files, sets up services,
and creates shortcuts to the Secure Access Manager.
12. At the end of the process, click Finish to exit the installation wizard.
13. The Secure Access server installation is now complete. Refer to Chapter 5 to set up the Secure
Access hardware.