![background image](http://html1.mh-extra.com/html/xerox/secure-access-unified-id-system/secure-access-unified-id-system_installation-manual_4126039015.webp)
Installation Overview
Xerox Secure Access Installation Guide
15
Core Authentication Server (CAS)
The Core Authentication Server (CAS) houses the database that contains all user and MFP device data.
Every Secure Access installation requires a pre-installed database. The CAS uses the database instance
to create an accounts database that contains all user and device information. See
on page 18 for information about supported databases.
Device Control Engine (DCE)
The Device Control Engine (DCE) handles all communication with the MFP devices. When a user wants
to use the copy, scan, or fax functionality on a MFP, they must first trigger the card reader. A swipe or
proximity read initiates an access request.
The Authentication Device forwards the login request to the DCE, which then contacts the CAS to
verify the user account data associated with the card.
Document Routing Engine (DRE)
The Document Routing Engine (DRE) is the print server. It’s primary function is to enable document
flow from user workstations to MFP devices. The following describes a typical DRE workflow:
1. A user generates a print request to an MFP that is registered in the Secure Access Manager
database.
2. If the user prints to a print queue that is using a Secure Access Manager port the DRE holds the job
on the print server.
3. When the user logs in at the MFP the DRE searches the jobs queued for that printer (and/or pull
group) and releases those that were submitted by the logged in user.
If a Secure Access port is not installed on the device, the print job is printed without validation.
If you want print jobs to be held in a secure queue, you can configure Follow-You printing. To enable
this functionality, you must configure the MFP to use a Secure Access port rather than a standard port.
The Port Monitor integrates with the Windows printing subsystem and functions as part of the spooler
service, allowing the Port Monitor to receive print jobs and then hold the jobs in a secure virtual queue
until a verified user releases them to a particular MFP.
In addition, you can add the Release My Documents custom service to the MFP. This service allows
users to access the secure print queue directly from the MFP front panel. See the Xerox Secure Access
Administration Guide for configuration instructions.
Содержание Secure Access Unified ID System
Страница 4: ...Contents Xerox Secure Access Installation Guide 4...
Страница 26: ...Installing the Secure Access Server Xerox Secure Access Installation Guide 26...
Страница 34: ...Setting Up the Secure Access Hardware Xerox Secure Access Installation Guide 34...
Страница 36: ...Configuration Tear Sheet Xerox Secure Access Installation Guide 36...