Xerox Phaser 6180 Скачать руководство пользователя страница 40

Страница: 40 / 616

1-16

Phaser 6180 Color Laser Printer Service Manual

General Information

Operating Mode

Mode

Condition

Description

Running Mode

The printer is under operating condition
such as running or recording.

Fusing

The system keeps the operating
temperature.

Exposure

The Laser Unit Motor runs at the running
speed.

Recording

The system is under operating condition.

Cooling Fan

The fan operates at high speed.

Control Panel
Operation

LCD - Backlight: On
LED - Ready LED is turned On.

Standby Mode

The printer is under standby condition.

Fusing

The system keeps the standby temperature.

Exposure

The system is at Pause.

Recording

The system is at Pause.

Cooling Fan

The fan operates at low speed.

Control Panel
Operation

LCD - Backlight: On
LED: If printer is online, Ready LED is
turned On.

Power Saver
Mode

The printer enters into the Power Saver
mode to reduce power consumption when it
has not received print data for the specified
time.

Fusing

The system is Off.

Exposure

The system is at Pause.

Recording

The system is at Pause.

Cooling Fan

The system is Off.

Control Panel
Operation

LCD: Off, LCD Backlight: Off
LED: Power Saver LED is turned On.

Note:

When the printer receives a print job or the

Wake Up

button is pressed, the

printer exits the Power Saver mode and enters the Ready mode.

Содержание Phaser 6180









































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Phaser 6180

Отзывы:

Xerox Phaser 6180, Руководство по обслуживанию, Страница: 40 / 616

Результаты поиска

Содержание Phaser 6180

Отзывы: