Xerox Phaser 6180 Скачать руководство пользователя страница 341

Страница: 341 / 616

Phaser 6180 Color Laser Printer Service Manual

5-23

Print-Quality Troubleshooting

Print-Quality Troubleshooting

Print-Quality Defect Definitions

The following table lists the print-quality defect corrective procedure, their
definition, and the page where each procedure is provided.

Defect

Definition

Page

Light or Undertone
Print

The overall image density is too light in all
colors.

page 5-25

Blank Print (No
Print)

The entire image area is blank.

page 5-27

Black Print

The entire image area is black.

page 5-29

Vertical Blank Lines

There are faded or completely non-printed lines
along the page.

page 5-31

Horizontal Band,
Voids, or Streaks

There are areas of the image that are extremely
light or are missing entirely.

page 5-33

Vertical Stripes

There are black lines along the page in the
direction of the paper travel.

page 5-35

Horizontal Stripes

There are dark lines running parallel with the
leading edge of the print.

page 5-37

Partial Band

There are areas of the image that are extremely
light or are missing in a limited area.

page 5-40

Rand om Spots

There are spots of toner randomly scattered
across the page.

page 5-42

Repeating Bands,
Lines, Marks, or
Spots

There are recurring lines, marks, or spots on the
page.

page 5-44

Background
Contamination

There is toner contamination on all or most of
the page.

page 5-47

Skew

The printed image is not paralleled with both
sides of the paper.

page 5-49

Damaged Paper

The paper comes out from the printer wrinkled,
folded, or worn-out.

page 5-51

Unfused Image

The toner image is not completely fused to the
paper. The image easily rubs off.

page 5-54

Color Registration

A printed yellow or black image is not
overlapped on a cyan or magenta image
correctly.

page 5-56

Содержание Phaser 6180









































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Phaser 6180

Отзывы:

Xerox Phaser 6180, Руководство по обслуживанию, Страница: 341 / 616

Результаты поиска

Содержание Phaser 6180

Отзывы: