Xerox Phaser 6180, Руководство по обслуживанию, Страница: 252 / 616

4-18 Phaser 6180 Color Laser Printer Service Manual
General Troubleshooting
Print NVM Info Print NVM Info
■
Processing
■
Please wait
<Press the Set button to
run the test>
<Press the
Cancel button
to move one level up the
menu>
Prints NVRAM information saved in the
Controller.
Print Info Provides printer configurations and settings information.
Menu Buttons
<Press the Up or Down
button to move from one
item to another>
<Press the
Cancel button
to move one level up the
menu>
<Press the
Set button to
move to the execution
level>
Info Page Info Page
■
Ready
■
Processing
Prints the software version of the
printer controller. Use this function to
verify the printer configuration. The
Configuration Page contains:
■
Engine installation unit information
■
Standard Tray
■
Optional Tray (displaying version)
■
Optional Duplex Unit (displaying
version)
■
Engine ROM Revision No.
■
MCU NVM Revision No.
Print Settings Print Settings
■
Ready
■
Processing
Prints the configured settings through
the Control Panel.
The Print Settings page contains:
■
Serial No.
■
HexDump On/Off Information
■
Tone Correction On/Off Information
■
Color Print Count
■
B/W Print Count
■
Total Print Count
■
Color Backup Count
■
B/W Backup Count
■
Total Backup Count
■
Color Error Count
■
B/W Error Count
Installation Provides printer installation information.
Serial No. SerialNo.
■
DPXxxxxxx
or
■
DRAxxxxxx
Displays the 6 digit Serial Number.
Note: This information is not initialized
with any key action.
Service Diagnostic Test Table (continued)
Test Control Panel Display Test Description