Xerox Phaser 6180, Руководство по обслуживанию, Страница: 257 / 616

Phaser 6180 Color Laser Printer Service Manual 4-23
General Troubleshooting
Cyan 20% ESS Cyan 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
cyan on the whole page.
Magenta 20%
ESS Magenta 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
magenta on the whole page.
Yellow 20%
ESS Yellow 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
yellow on the whole page.
Black 20% ESS Black 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
black on the whole page.
CMY 20% ESS CMY 20% ESS
■
Ready
■
Processing
Prints 20% density paint pattern of
cyan, magenta, and black combined on
the whole page.
Gradation ESS Gradation ESS
■
Ready
■
Processing
Prints a pattern in which the density of
each cyan, magenta, yellow, or black is
varied from 0-100%.
Parameter Reads/writes the parameter values, errors, and life counter values
stored in the printer.
Menu Buttons
<Press the Up or Down
button to move from one
item to another or
change the value>
<Press the
Cancel button
to move to one/two
level(s) up the menu
without saving the value>
<Press the
Set button to
run the test or the value
in NVM and move one
level up the menu>
Note: After the setting has been
changed, the “ * ” at the right end
disappears.
Sets registration in the paper feeding
direction.
Note: When the value is minimum or
maximum, pressing the Up or Down
button does not change the value.
Slow Scan KtoP Slow Scan KtoP
■
-128 *
■
:
■
127 *
Adjusts the registration in the paper
feeding direction.
Slow Scan
600M Slow Scan 600M
■
-30 *
■
:
■
30 *
Slow Scan
600Y Slow Scan 600Y
■
-30 *
■
:
■
30 *
Service Diagnostic Test Table (continued)
Test Control Panel Display Test Description