Xerox Phaser 3300, Руководство по обслуживанию

Страница: 126 / 296

5-8 Phaser 3300MFP Service Manual
Print-Quality Troubleshooting
Print-Quality Troubleshooting
Print-Quality Defect Definitions
The following table lists the print-quality defect corrective procedure, their
definition, and the page where each corrective procedure is provided.
Defect Definition
Page
Light Image The overall image density is too light. page 5-12
Dark or Black Image The entire image area is black. page 5-13
Uneven Density Print Density is uneven between the left and
right sides. page 5-13
Background Light or gray dusting contamination appears on
all or most of the page. page 5-14
Ghost (1) There is ghosting at 75.5 mm intervals from the
OPC Drum. page 5-14
Ghost (2) There is ghosting at 75.5 mm intervals on the
whole print. page 5-15
Ghost (3) There is ghosting at 62.8 mm and 77.6 mm
intervals. page 5-15
Ghost (4) page 5-15
Vertical White Line There are faded or completely non-printed lines
along the page of the paper travel from the
leading edge to the trailing edge. page 5-10
Vertical Black Line
and Band There are faded or black lines along the page in
the direction of the paper travel from the leading
edge to the trailing edge. page 5-10
Horizontal Black
Band There are black lines running parallel with the
leading edge of the print. page 5-11
Black/White Spot The toner image is not completely fused to the
paper. The image easily rubs off. page 5-12
Stains on the front
of the page The background of the front of the page is
stained. page 5-16
Stains on back of the
page The background of the back of the page is
stained. page 5-16
Blank Page Print Out
(1) The entire image area is blank. page 5-17
Blank Page Print Out
(2) The entire image area is blank. One or several
blank pages are printed. page 5-17