Xerox Phaser 3300, Руководство по обслуживанию

Страница: 88 / 296

3-8 Phaser 3300MFP Service Manual
Error Messages and Codes
Group Not Available You have tried to select a group location
number where only a single location
number can be used, such as when adding
locations for a Multiple Send operation. Use a speed dial number or dial a number manually
using the number keypad.
[Incompatible] The remote machine does not have the
requested feature, such as polling. This
message also occurs if the remote
machine does not have enough memory
space to complete the operation you are
attempting. Reconfirm the remote machine features.
Install Toner A print cartridge is not installed or bad
contact between CRUM terminals and
CRUM Board Install a print cartridge.
Invalid Server Address The server address you have entered is
invalid. Enter the correct server address.
Invalid Cartridge The print cartridge you have installed is not
compatible with your machine. Install a Xerox-genuine print cartridge, designed for
your machine.
Line Busy The receiving fax machine did not answer
or the line is already engaged. Try again after a few minutes.
[Line Error] Your machine cannot connect with the
receiving fax machine or has lost contact
because of
a problem with the phone line. Try again. If the problem persists, wait an hour or so
for the line to clear and try again. Or, turn the ECM
mode on.
Invalid Toner The print cartridge you have installed is not
for your printer. Install a Xerox-genuine print cartridge, designed for
your printer.
Low Heat Error Cycle
Power There is a problem in the fuser unit. Unplug the power cord and plug it back in. If the
problem persists, please call for service.
LSU Motor Error Cycle
Power A problem has occurred in the LSU (Laser
Scanning Unit). Unplug the power cord and plug it back inches. If the
problem persists, please call for service.
LSU Hsync Error Cycle
Power A problem has occurred in the LSU (Laser
Scanning Unit). Unplug the power cord and plug it back inches. If the
problem persists, please call for service.
Main Motor Locked There is a problem in the main motor. Open and then close the front cover.
Mail Exceeds Server
Support The mail size is larger than the supported
size by SMTP server. Divide your mail or reduce the resolution.
Memory Dial Full You are trying to schedule a fax job when
memory for storing fax jobs is full. Wait until a scheduled job is completed.
Memory Full The memory is full. Delete unnecessary fax jobs and retransmit after
more memory becomes available. Alternatively, split
the transmission into more than one operation.
MP Tray Paper Empty There is no paper in the multi-purpose tray. Load paper in the multi-purpose tray.
Network Error There is a problem with the network. Contact your network administrator.
[No Answer] The receiving fax machine has not
answered after several redial attempts. Try again. Make sure that the receiving machine is
operational.
Message Meaning Suggested solutions