manualshive.com logo in svg

Xerox DocuPrint C55, Руководство по обслуживанию

Продукт Xerox DocuPrint C55 представляет собой многофункциональное устройство для печати, сканирования и копирования. Дополнительное руководство доступно для бесплатного скачивания на {веб-сайте}, чтобы помочь пользователям использовать все функции этого устройства более эффективно.

Поделиться
Скачать
background image

GENERAL PROCEDURES 

2/99

TIPS & TRICKS

6-36

DocuPrint [NC60]

TIPS & TRICKS  [NC60]

Press

Display Reads

Menu Up

 -

 

until

Menus
Print

Item Down 

-

 

until

Print
Tips & Tricks

Enter

Processing . . .

This page lists some common tips and tricks which will
make printing easier.

Your new DocuPrint NC60 was designed with many unique features to assist you in producing the highest
quality color and black & white prints.  These features, along with important tips on how to get the best results
with your DocuPrint NC60, are explained below.  For the latest product information, please check the Xerox
web site at http://xerox.networkprinters.com.

If you have any questions please call us Toll-Free:

USA: 1-800-TeamXRX Canada: 1-800-93XEROX

or

Visit our Web site at: 

http://xerox.networkprinters.com

Practical Tips for the:

 

Xerox 

DocuPrint NC60 

Color Laser Printer

Expert Color Control.

If you want to adjust the color of your prints to better match
those from another printer, Xerox provides Expert Color
Controls.  These controls enable you to fine-tune the colors on
your printed document.

• 

Color Adjustment:

 

Choose color adjustment from the print

driver to make changes for lightness and saturation on
individual print jobs.

• 

Color Balance:

 

With Color Balance you can adjust the

contrast range between colors from within the driver.  This
feature enables you to adjust the amount of Red, Green, and
Blue in all your documents.

Image Enhancement

• 

ImageFix:

 

Occasionally, scanned images or images

downloaded from a digital camera are too dark or light,
lacking contrast.  ImageFix automatically corrects imperfect
photographs by re-balancing, and optimizing the, image as it
prints to provide optimal image quality. (Win 95/98/NT
only)

• 

IntelliRes:

  

Web sites use low resolution images to speed

downloading and viewing on a monitor.  However, when
these images are printed the result is often unsatisfactory.
IntelliRes automatically analyzes these coarse photos and
smoothes them for more pleasing printed output.

Internet Printing

• 

Distribute and Print:

 

Use your E-mail enabled print driver to

distribute documents to several printers at once with a single
mouse click.  By simply entering the E-mail address of each
destination printer and selecting "print' from your Window's
application, a job can be sent to a printer anywhere.

• 

Remote Administration:

 

Use the NC60 embedded Web

server to perform any printer administration function.  You
can display status and diagnostics as well as configure the
printer from any location.

• 

Remote Monitoring:

 

Use any web browser to monitor and

maintain your printer.  You can query your consumable
status or even configure the printer to automatically send an
E-mail message when it needs attention.

PostScript Printer Driver Features

Using your PostScript Driver enables many of the features
listed below.

Intelligent Color

Intelligent Color applies the optimum imaging method for
documents containing a mix of photos (bitmaps), charts
(graphics) and text.  This setting will produce the best
combination of print quality and speed for a full range of
documents.

Vivid Color

When printing charts and graphs, Vivid Color will enhance
your document with bright, solid colors.  This setting is
recommended for full color business documents.

Enhanced 1200 Image Quality

For the best print quality, choose 1200 Image Quality in your
print driver.  This selection will produce an ultra-smooth
image, without visible 'dots' in the print.  Note that with
complex documents the first print might be delayed a few
seconds.

Refer to the user's guide for additional color settings.

Special Purpose Printing

• 

Fax Friendly Black:

 

Fax Friendly Black converts colors into

different patterns of black and white, so you can fax or copy
your document without losing any information.  The
document remains clear, readable, and informative.

• 

Fast Blue:

 

Do you need faster output, but want to keep the

impact of color?  Fast Blue mode converts your images to
shades of black and cyan (blue), while doubling the print
speed to 6 ppm.

• 

ZipColor:

 

When full color images with little text are needed

quickly, ZipColor increases color print speed by 33% to 4
pages per minute.  This feature will also eliminate
differential gloss sometimes seen on prints containing dark
graphics or photos.  For the best black text quality, choose
either the Intelligent Color or Vivid Color mode.

Содержание DocuPrint C55















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DocuPrint C55

Canon ImageCLASS MF4570dw Basic Operation Manual preview
ImageCLASS MF4570dw
Бренд: Canon Страницы: 164
Canon imagePRESS C800 Series Service Manual preview
imagePRESS C800 Series
Бренд: Canon Страницы: 132
Canon ImageCLASS MF5730 Technical Information preview
ImageCLASS MF5730
Бренд: Canon Страницы: 2
Xerox AS/400 Installation And Setup Manual preview
AS/400
Бренд: Xerox Страницы: 23
IBM 6400 Series Operator'S Manual preview
6400 Series
Бренд: IBM Страницы: 113
IBM 6400 Series Owner'S Manual preview
6400 Series
Бренд: IBM Страницы: 16
IBM 6400 Series User Manual preview
6400 Series
Бренд: IBM Страницы: 214
Canon TR8600 Series Getting Started preview
TR8600 Series
Бренд: Canon Страницы: 20
Canon PIXMA TS9100 Series Getting Started preview
PIXMA TS9100 Series
Бренд: Canon Страницы: 100
Canon PIXMA TS8120 Getting Started preview
PIXMA TS8120
Бренд: Canon Страницы: 100
Canon N 1000 Setup Manual preview
N 1000
Бренд: Canon Страницы: 105
Canon Pixma G1010 Series Getting Started preview
Pixma G1010 Series
Бренд: Canon Страницы: 16
Canon PRO-4000S Setup Manual preview
PRO-4000S
Бренд: Canon Страницы: 14
Canon iP1500 - PIXMA Color Inkjet Printer Service Manual preview
iP1500 - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 21
Canon S820D Quick Start Manual preview
S820D
Бренд: Canon Страницы: 68
Canon iP4500 - PIXMA Color Inkjet Printer Easy Setup Instructions preview
iP4500 - PIXMA Color Inkjet Printer
Бренд: Canon Страницы: 2
Canon Pixma TS3400 Series Manual preview
Pixma TS3400 Series
Бренд: Canon Страницы: 76
Canon MAXIFY GX4000 Series Getting Started preview
MAXIFY GX4000 Series
Бренд: Canon Страницы: 59

Бренды по названию

Популярные бренды

Загрузить еще бренды