manualshive.com logo in svg

Xerox DocuPrint C55, Руководство по обслуживанию

Поделиться
Скачать
Xerox DocuPrint C55 Скачать руководство пользователя страница 2

NOTICE

“All Service documentation is supplied to Xerox
external customers for informational purposes
only.  Xerox Service Documentation is intended
for use by certified, product trained personnel
only.  Xerox does not warrant or represent that
such documentation is complete, nor does Xerox
represent or warrant that it will notify or provide
to such customer any future changes to this
documentation.  Customer performed service of
equipment, or modules, may affect the warranty
offered by Xerox with respect to such equipment.
You should consult the applicable warranty for its
terms regarding customer or third party provided
service.  If the customer services such
equipment, modules, components or parts
thereof, the customer releases Xerox from any
and all liability for the customer actions, and the
customer agrees to indemnify, defend and hold
Xerox harmless from any third party claims
which arise directly or indirectly from such
service.”

Prepared by:
Xerox Corporation
Multinational Customer and Service Education
780 Salt Road
Webster, New York  14580

©1999 by Xerox Corporation.  All rights reserved.
Xerox and all Xerox products mentioned in this publication
are registered trademarks of the Xerox Corporation

CLASS 1 LASER PRODUCTS

This product is certified as a Class 1 Laser
product and complies with DHHS Laser-
Radiation Standards, 21 CFR Chapter 1 Sub-
chapter

 

J.

WARNING

Use of controls, adjustments, or perform-
ances of procedures other than those
specified in this manual may result in
hazardous radiation exposures.

The C55/C55mp/[NC60] each contain an
invisible laser.  There is no visual indication that
the laser beam is present.  During servicing, the
C55/C55mp/[NC60] remain a Class 1 product
because of the interlock system.  Do not attempt
to cheat the interlock switches on this printer.

Содержание DocuPrint C55















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды