Xerox DocuPrint 65, Руководство по планированию установки

Страница: 40 / 60

Product overview Installation Planning Guide
3-4 DocuTech 65/DocuPrint 65
Paper trays (trays 1-4)
Paper trays 1-4 are shown below in Figure 3-3.
Figure 3-3. Trays 1-4
The Paper Trays hold up to 500 sheets of 20 lb (75 gsm) stock each. You can
adjust the trays to hold many sizes fo paper, from 5.5 x 8.5 inches (140 x 216
mm) up to 11 x 17 inches (279 x 432 mm or A3). To handle 12 x 18 inch paper,
a tray must be specially set up. If you wish to dedicate a tray permanently to
handle this size paper please contact the Xerox Welcome Center.
Refer to the chapter on Maintenance and supplies for a listing of acceptable
stock and paper sizes, orientations, and weights.
NOTE: To achieve the maximum copying speed, paper should be loaded
Long Edge Feed in the paper trays whenever possible.
Bypass tray (tray 5)
The Bypass Tray (Tray 5) is an additional paper tray designed for quick and
easy loading of both standard and non-standard paper. It can physically
extend to accommodate different stock sizes and orientations. You can load a
maximum of 50 sheets of standard weight 20 pound (75 gsm) stock. If using a
heavier stock, fill the tray only to the maximum-fill line.
The Bypass Tray has a capability of 4 to 12 inches (102 to 305 mm); 5.83 to
18 inches (148 x 457 mm).
The Bypass Tray can also hold non-standard size and weight paper such as
transparencies, labels, covers, index, and bond paper. The Bypass Tray is
shown below in Figure 3-4.
Trays 1 - 4