Xerox DocuPrint 65, Руководство по планированию установки

Страница: 16 / 60

Safety notes Installation Planning Guide
xii DocuTech 65/DocuPrint 65
Controller
USA/Canada
The controller requires a dedicated 115V AC 20 Amp grounded receptacle.
Europe
The controller requires a 220-240V, 13 or 10 Amp grounded receptacle.
CAUTION
Follow all safety cautions, warnings, and instructions marked on the
controller.
• Ensure that the voltages and frequency rating of the power receptacle
match the electrical rating label on the equipment.
• Do not make electrical or mechanical modifications to the equipment.
• Use the power cable that is supplied with your controller. Do not use an
extension cord, or remove or modify the power cord plug. If the plug must
be changed, a qualified electrician must install the plug correctly on the
power cord.
• Plug the power cable directly into a correctly grounded electrical outlet or
into the power strip that is connected to this outlet. If you are not sure
whether or not the outlet is correctly grounded, consult a qualified
electrician.
• Do not use an adapter to connect the controller to an electrical outlet that
lacks a ground connection terminal.
• The power switch functions as a standby type of device only. The power
cord serves as the primary disconnect device for the system.
• Do not push objects into slots or openings on the equipment. Electrical
shock or fire may result.
• Do not obstruct ventilation openings. These openings prevent
overheating of the controller.