Xerox DocuPrint 180, Руководство по настройке системы

Страница: 27 / 132

INTRODUCTION TO THE GRAPHICAL USER INTERFACE
XEROX DOCUPRINT 96/4635/180 IPS GUIDE TO CONFIGURING AND MANAGING THE SYSTEM 1-15
The Input Configuration section—the upper part of the larger left
column—contains the following fields:
•
Input Configuration pull-down menu — Allows you to select
an Input Configuration window. Once you select an Input
Configuration window, you will be able to modify margin settings
from that window, and to create or change Input Configurations,
DFA personality profiles, and media icons.
•
IPDS Trays — Graphically shows the stocks that the current
configuration has associated with the input trays that are called
out in the job (IPDS data stream).
This field consists of a row of eight boxes called “tray cells,”
each of which represents an input tray that a job might specify.
The number above each tray cell is the tray’s identification
number. The number(s) below each tray cell indicate the printer
trays to which the IPDS tray has been mapped.
Any IPDS tray for which a particular stock has been identified
displays a media icon in its tray cell. A media icon graphically
represents a stock, showing its weight, color, size, and form
type (3-hole, etc.).
Note: You map an IPDS tray to a printer tray by placing a
media icon for the same stock in the cells for both trays.
The mapping of IPDS trays determines the use of system
memory for handling media of different sizes. It is
recommended that media that are not used in a particular job is
not placed in an IPDS cell.
•
Printer Trays — Graphically shows the stocks that should be
loaded in the physical feeder trays for the current input
configuration.
The Printer Trays field consists of a row of tray cell boxes, each
of which represents one of the printer’s feeder trays. (The
number of cells in this field is the number of input trays your IPS
printer supports.) Tray cells for feeder trays in which stocks will
be loaded contain media icons representing those stocks.