manualshive.com logo in svg

Xerox DocuColor 2060, Руководство по обслуживанию, Страница: 63 / 88

Поделиться
Скачать
Xerox DocuColor 2060 Скачать руководство пользователя страница 63

Default settings for the printer engine

 Guide to Performing Routine Maintenance

7-11

Auto Resume Stop

Use the Auto Resume Stop timer to automatically restart a job 
when the Pause button on the control panel was pressed and the 
job is waiting for user instruction.

To set the Auto Resume Stop timer:

1. Access the System Timers screen (refer to the section 

“Accessing the timers”).

2. On the System Timers screen, touch the Auto Resume Stop 

button. The Auto Resume Stop screen displays.

3. Use the up or down arrow buttons to change the time. The 

range available is 1 to 10 minutes.

To use the system default time of 2 minutes, touch the 
System Default button.

Figure 7-12. Auto Resume Stop screen

4. Touch the Enter button on the screen to enter the new time 

into the system.

5. Touch the Close button to return to the Machine Defaults 1 

screen, or select another timer to change.

Содержание DocuColor 2060

























































































Отзывы:

Нет отзывов