Default settings for the printer engine
7-10
Guide to Performing Routine Maintenance
Tools Off
Use the Tools Off timer to have the printer automatically return to
the printing mode when no action has been taken on the Tools
mode screens after the set amount of time.
NOTE: Jobs that are sent over the network queue but do not
print while the Tools mode is active.
To set the Tools Off timer:
1. Access the System Timers screen (refer to the section
“Accessing the timers”).
2. On the System Timers screen, touch the Tools Off button.
The Tools Off screen displays.
3. Use the up or down arrow buttons to change the time. The
range available is 10 to 60 minutes.
To use the system default time of 10 minutes, touch the
System Default button.
Figure 7-11. Tools Off screen
4. Touch the Enter button on the screen to enter the new time
into the system.
5. Touch the Close button to return to the Machine Defaults 1
screen, or select another timer to change.
Содержание DocuColor 2060
