manualshive.com logo in svg

Xerox DocuColor 2060, Руководство по обслуживанию, Страница: 59 / 88

Поделиться
Скачать
Xerox DocuColor 2060 Скачать руководство пользователя страница 59

Default settings for the printer engine

 Guide to Performing Routine Maintenance

7-7

Power Saver

Use the Power Saver timer to set the time that will elapse until 
the printer enters a reduced power consumption mode. This 
timer is activated when all print jobs have been completed and 
there are no jobs in the job queue.

The printer exits the Power Saver mode when a job is sent to be 
printed, or when the Power Saver button on the control panel is 
pressed.

To set the Power Saver timer:

1. Access the System Timers screen (refer to the section 

“Accessing the timers”).

2. On the System Timers screen, touch the Power Saver 

button. The Power Saver screen displays.

3. Use the up or down arrow buttons to change the time. The 

range available is 1 to 240 minutes.

To use the system default time of 60 minutes, touch the 
System Default button.

Figure 7-8. Power Saver screen

4. Touch the Enter button on the screen to enter the new time 

into the system.

5. Touch the Close button to return to the Machine Defaults 1 

screen, or select another timer to change.

Содержание DocuColor 2060

























































































Отзывы:

Нет отзывов