Xerox ColorQube 9201, Руководство пользователя

Страница: 265 / 331

Device Settings
ColorQube™ 9201/9202/9203
Administration and Accounting
265
Telephone Numbers
Use to enter your Customer Support and
Supplies Telephone numbers which are
displayed on the device.
• Customer Support Number is
selected to enter the Xerox Support
number supplied with your device.
Enter the number using the keyboard
and select
Save . To delete an incorrect
character entry use the backspace
key, or to delete the entire entry select
Clear .
• Supplies Number is selected to enter the telephone number you call to obtain supplies for your
device. Enter the number using the keyboard and select Save . To delete an incorrect character
entry use the backspace key, or to delete the entire entry select Clear .
• Select Next to continue to the next screen. A completion screen is displayed with instructions for
printing a configuration report if required. Select Done to exit.
• Select another option to program or select Close to return to the previous screen.
Fax Setup
This option provides a wizard style method
for entering all the fax information
required to setup your device ready for
faxing. Select or enter the information
required then select
Next to continue
through the setup procedure.
• Country Selection is used to select
the country the device is located in.
• Select the Country required and select
Next to continue with the fax setup.
• Line 1 Phone Number is the number
of the phone line your system is attached to.
• Line 1 ID is a friendly name to logically identify the system.
• Line Options is used to configure fax line 1 for send and receive operations.
• Enter the information required and select Next to continue with the fax setup.
• Line 2 Phone Number is the number of the second phone line your system is attached to if the
extended fax option is installed.
• Line 2 ID is a friendly name to logically identify the system.
• Line Options is used to configure fax line 2 for send and receive operations.
• Enter the information required and select Next to continue to the next screen.
• A completion screen is displayed with instructions for printing a configuration report if required.
Select
Done to exit.
• Select another option to program or select Close to return to the previous screen.