Xerox AltaLink B8145, Руководство пользователя

Страница: 378 / 418

reducing your paper consumption. The Lot 4 Imaging Equipment agreement requires that on models greater than
or equal to 40-ppm color or greater than or equal to 45-ppm monochrome, the duplex function has been auto-
enabled during the setup and driver installation. Some Xerox models below these speed bands can be enabled with
2-sided printing settings defaulted on at the time of installation. Continuous use of the duplex function reduces the
environmental impact of your work. However, if you require 1-sided printing, you can change the print settings in
the print driver.
Paper Types
This product can be used to print on both recycled paper and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight paper of 60 g/m²,
which contains less raw material and thus saves assets per print, can be used in certain applications. You are
encouraged to verify if lighter weight paper is suitable for your printing needs.
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development and
purchase of energy-efficient models, which help to reduce the environmental impact.
Details on the ENERGY STAR program and models qualified to ENERGY STAR can be found
at the following website:
www.energystar.gov .
The ENERGY STAR and ENERGY STAR mark are registered United States trademarks.
The ENERGY STAR Imaging Equipment Program is a team effort between the United
States, European Union, Japanese governments, and the office equipment industry. This
image-equipment program promotes energy-efficient copiers, printers, fax, multifunction
printers, personal computers, and monitors. Reducing product energy consumption helps to
combat smog, acid rain, and long-term changes to the climate by decreasing the emissions
that result from generating electricity.
For more information on energy or other related topics, go to www.xerox.com/environment or www.xerox.com/
environment_europe .
Power Consumption and Activation Time
The amount of electricity that a device consumes depends on the way the device is used. This device is designed
and configured to enable you to reduce your electricity usage.
To reduce energy consumption, your device is configured to use Energy Saver modes. After the last print, the device
transitions to Ready mode. In Ready mode, the device can print again immediately. If the device is not used for a
specified period, the device transitions to Sleep mode. To reduce power consumption, only essential functions
remain active in Sleep mode. The device takes longer to produce the first print after it exits Sleep Mode, than it
takes to print in Ready mode. This delay is the result of the printer that wakes up and is typical of most imaging
devices on the market.
To save power, you can configure Energy Saver modes. The following options are available:
• JJoobb A Accttiivvaatteedd: The device wakes when it detects activity. To set the delay before the device enters Sleep Mode,
enter the number of minutes.
• SSlleeeepp aanndd w waakkee uupp aatt sscchheedduulleedd ttiim meess: The device wakes and sleeps according to a schedule that you
specify.
378
Xerox
®
AltaLink
®
B8145/B8155/B8170 Series Multifunction Printer User Guide
Regulatory Information