Web Print Manager Tool User Guide
Page 33
be rebooted after selecting/deselecting the DDS Enabled box before the change will
take effect.
9.
Area Media Usage
-This field reports the total area of media printed by the printer.
This parameter is only displayed for the 8830, 8825, 8850, 510DP, and 721P printers.
You cannot set this parameter.
10.
Linear Media Usage
- This field reports the total length of media printed by the printer.
You cannot set this parameter.
11.
Plot Nesting
Ÿ
Enabled
- Click on this check box to enable/disable the nesting of plots from one or
more print jobs.
Ÿ
Exclusive
- When this check box is selected, the printer will start a new plot nest
for each print job (i.e., plots from two or more jobs will not be placed on the same
output page).
Ÿ
Timeout
- Enter the maximum idle time in seconds after processing a print job
before printing an incomplete nested output page.
Ÿ
Margins
- Enter the printer-imposed margin spacing between plots in a nested
output page.
Ÿ
Nesting Length
- Enter the maximum length of a nest. If a plot to be placed in a
nest exceeds this length, the nest will be terminated and the plot will be printed
separately.
12. Press the
Update Printer
button to update the specified parameter changes in the
printer.
Pen Palettes Page
Navigation:
PRINTER DEFAULTS > PRINTER SETUP > Pen Palettes
You can use this page to view or change (if you entered the printer password) the Pen
Palettes stored in the printer. The pen palette settings apply to the following file formats
(vector graphic languages): HPGL, CalComp, VDS and CGM. Any one of the 9 Pen Palettes
can be displayed or downloaded from the printer. Palette 0 is read only. Pen Palettes 1
through 8 can be changed or uploaded to the printer. The Pen Palette Table displays the Pen
Number and corresponding Pen Attributes for the 256 pens in a palette.
1. To display a different palette, click on the
Palette Name
list box to select a specific
Pen Palette (select a number from 0 to 8). Press the
Display Palette
button and the
Pen Palette Table will be updated to display the selected palette.
2. To save or load the currently selected palette, click on palette name link at the top of
the palette table (e.g., click on
Palette #1
) to display the Pen Palette Options page.
This page is used to save or load a Pen Palette (if you entered the printer password on
the Session Setup page).
Ÿ
To save the selected Pen Palette to a file, press the
Save Palette
button and the
Save Palette File dialog will display. Enter the directory and file name in the Save
As file dialog. Press the
OK
button and the selected Pen Palette will be saved in
the specified file. You will be returned to the Pen Palette Options page. To return to
the Pen Palettes page, press the browser
Back
button.
