Page 14
Web Print Manager Tool User Guide
Uploading a File
1. Click on
Printer Defaults > Utilities > Upload File
.
2. In the
Select the file to upload
field, enter the filename (with extension) and its
location. To view the standard Open File dialog, press the
Browse
button.
3. Press the
Upload
button to transfer the file to the system AccXES Controller. A
message page will display stating the success or failure of the request. The file will
print out.
Canceling a Print Job
1. Send a few print jobs to the printer by doing one of the following:
Ÿ
Send a test print (
Printer Defaults > Test Print > Normal Test
).
Ÿ
Upload a file.
Ÿ
Scan images.
2. Select
BACK to MAIN
.
3. Press the
Get Status
button to update the Job Queue List.
4. Click on an active print
Job Name
(the name is a hypertext link) and the Selected Print
Job page will display.
5. Press the
Cancel
button to cancel this print job. The Canceled Print Job page will
display, showing that the job was canceled, or is in the process of being canceled.
6. Press the
OK
button or the
BACK TO MAIN
link to return to the Main Page.
For any mismatched job, indicated in the Status column of the Job Queue, click on the
supplied checkbox to obtain information about the mismatch condition. The printer
password is not required.
NOTE:
In the
AccXES Client Tools
, to cancel a submitted job, highlight the job name
in the
Printer Queue
window. Select the
Cancel
toolbar button.
Set Display Units Page
If you entered the printer password, from the Session Setup link on the Main Menu, you can
set the units of measure for the Web PMT pages by doing the following:
1. Click on
PRINTER DEFAULTS > UTILITIES > Set Display Units
to go to the Set
Display Units page.
2. Click on the appropriate radio button,
mm/cm
(millimeters/centimeters) or in. (inches),
to select the display units.
3. Press the
Update Printer
button to set the selected units in the printer. A message will
be displayed which will state the success or failure of the request.
Setting the Accounting Mode
1. Click on
ACCOUNTING
and the Accounting page will display.
