Page 12
Web Print Manager Tool User Guide
Job Queue and Media Status
1. Select
BACK TO MAIN
.
When you first access the Web PMT, or click on the
BACK TO MAIN
link, the Web
PMT will query the Printer’s AccXES Controller. It will report the currently installed
media status and the status of submitted print jobs on the Main Page. The status is not
automatically updated.
Media status
The Media Status table reports the status of the rolls in the printer. This includes
media size and the status of the material remaining on the roll. If a folder is attached to
the printer, the Finishing table will display the folder Type and Status.
Job Queue
The Job Queue will refresh automatically, based on the timeout that is set from the
UTILITIES > Web PMT Settings page.
The Job Queue List displays the Job Queue inside the AccXES Controller. The list
contains information about all submitted print jobs from all sources currently queued in
the AccXES Controller’s internal spool queue. In the Port column, if the job was
received over the network, the host IP Address will be displayed. For copy, scan-to-
print, and scan-to-print jobs, “Scanner” will be displayed.
2. To view only the active print jobs (i.e., not list the canceled or completed jobs), check
the
Show Active Jobs Only
box and press the
Get Status
button.
3. For any mismatched job, indicated in the Status column of the Job Queue, click on the
supplied checkbox to obtain information about the mismatch condition. Mismatch jobs
can occur when there is an incorrect media type or size in the printer for the type of
image being printed.
Viewing the Printer Configuration and Printing a Test
Print
1. Click on
PRINTER DEFAULTS
and the Configuration page of the UTILITIES group
will display. This read-only page displays system configuration parameters for the
printer.
2. To print out the system configuration data and other printer default settings, click on
the
TEST PRINT
item on the Side Menu.
3. When the Test Print page displays, press the
Minimal, Normal,
or
Full
button to
select the type of test print. The test print will be given the highest priority and will be
sent to the printer. If you purchased and installed the
PostScript
option, you can also
press the PostScript button to print a PostScript test page.
NOTE:
The "Minimal " selection prints just the Printer Configuration Test Print, which
includes, among its configuration, feature key licensing information, the IP Address,
Subnet Mask, and Gateway address for your printer.
