manualshive.com logo in svg

Xerox 6279, Руководство пользователя

Поделиться
Скачать
Xerox 6279 Скачать руководство пользователя страница 164

Handling Consumables

• Follow the instructions on the packaging when storing consumables.

• When storing toner cartridges, it is best to store them horizontally rather than upright.

• Do not unpack consumables until they are needed.

• Avoid storing consumables in:

-

Hot and humid locations

-

Locations close to a fire

-

Locations exposed to direct sunlight

-

Dusty locations

• Before using consumables, carefully read the instructions and precautions on the

packaging.

• Follow the disposal instructions for used toner and Waste Toner Bottles.

• Check the part number of the consumables and contact your Xerox Customer Support

Center to place your orders.

Loading Toner

If only a small amount of toner remains in a toner cartridge, the machine may stop
during printing and display a message. If this happens, load the toner and then you may
continue copying or printing. Make sure the machine has stopped before following the
steps below.
1. Lift the Scanner Document Table until it clicks into the open position.

Xerox

®

 6279

®

 Wide Format Solution

7-2

Copy/Scan User Guide

Maintenance

Содержание 6279

























































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды