Xerox 5101, Руководство пользователя

Страница: 147 / 176

Wide Format Copy System User Guide 141
11 Job Accounting
Job Accounting
NOTE: The JOB ACCOUNTING feature is an optional feature on the Wide Format Copy System,
requiring a Feature Key to activate it. If you obtain this feature, the System Administrator
can enable it at any time on the Wide Format Copy System by sending a special feature
key file to the Printer. Once the feature is enabled, it remains enabled (even following
upgrades to the system software). Contact your XEROX sales representative for
ordering information.
Overview
JOB ACCOUNTING is a SYSTEM ADMINISTRATION menu option. Access to it is restricted to
the system administrator and requires the entry of the system administration password.
The JOB ACCOUNTING option allows Scan System and Printer usage to be recorded in user
defined account numbers. Usage is expressed as the area (not the length) of the media scanned
or used.
Job Accounting for the Scan System is controlled through the Scan System Control Panel. For
the Wide Format Copy System 510 Series, 6204, and 721P, Job Accounting for the Printer can
be set from either the Printer Control Panel or the Web-based Print Management Tool. For the
Wide Format Copy System 6030/6050/6050A, Job Accounting for the Printer can be set from the
Web Printer Management Tool only.
The Web Printer Management Tool consists of special Web pages located in the Controller.
They are accessible through either the Microsoft Internet Explorer or the Netscape browsers.
Version 4.0 or higher is required for proper results. Other Web browsers are not supported and
may or may not work correctly.
Job Accounting can be set on the Scan System or Printer to one of three modes. The modes are
ENABLED, OPTIONAL, and DISABLED.
The Scan System and Printer share a common job based accounting database referred to as the
FreeFlow Accxes Account Management Tool. This Account Management Tool is composed of
two components, an external accounting software package, installed on an Administrative
workstation, and the job log file that is created on the Controller. The Account Management Tool
creates all accounts, assigns the user IDs, gathers all the account data, manages all the
accounts, and provides account reports.
NOTE: For full information on the new job accounting refer to the Account Management Tool
help files.