Xerox 4050, Руководство оператора

Страница: 132 / 168

SOLVING PROBLEMS
2. Open the side cover of the stitcher/stacker by pushing the
cover to the right (in the direction of the large green arrow
at the front of the cover).
3. Remove only the set of prints leaving the stitcher/stacker at
the right and place it on the output in the stacker tray. Do
not remove any other pages from this area.
The pages were compiled by the stitcher/stacker into a set
(stapled or not), but something prevented the set from being
delivered to the stacker. You put the set in the stacker tray
because the system has counted it as completed.
Clearing the stacker tray
A jam can occur when the paper does not stack smoothly in the
stacker trays. If some paper weights stack well while others do
not, the scuffer arms may need to be adjusted. Some printers
must be adjusted by a service representative. Others have
adjustable weights on the underside of the scuffer arms. If your
LPS has scuffer arm weights, adjust them as shown below.
• If the paper appears to climb up the outside edge of the tray,
move the weight toward the machine.
• If the paper is not driven far enough into the tray, move the
weight away from the machine.
8-14 XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE