Xerox 4050, Руководство оператора

Страница: 85 / 168

PRINT JOB MAINTENANCE
Unloading output trays
You can unload output trays while the system is printing.
When a stacker tray is full, the following occurs:
• The Tray Full indicator lights on the appropriate stacker tray
(applies to dual stacker only).
• A message displays on the printer control console that
indicates which output tray is full.
• In automatic switching mode, the system automatically
switches over to the second tray (if it is empty) when one
tray is full (applies to the dual stacker only).
• If only one tray was selected or if both output trays are full,
the printer stops.
• The picture on the graphic display shows the location of the
full tray.
Unloading dual stacker trays
Follow these steps to unload dual stacker trays:
1. Raise the scuffer arm.
2. Remove the stack of prints.
XEROX 4050/4090/4450/4650 LPS OPERATOR GUIDE 5-19