Xerox 1235DT - Phaser Color Solid Ink Printer, Руководство по обслуживанию

Страница: 78 / 239

Service Guide 65
Switch scans and the sensor and switches test
Switch or
sensor Switch scan test Test result Details
Tray 1 No Paper
Sensor Switch Scan 00
1= L - Paper present
H - No paper Pull main tray out to test sensor
Tray 1 Low Paper
Sensor Switch Scan 00
2= L - Paper level OK
H - Low paper Pull main tray out to test sensor
Cassette
Entrance Switch Scan 00
3= L - No paper
H - Paper present Open front door and toggle sensor flag
behind feed rollers
Manual Bypass
Feeder Entrance/
Registration
sensor Switch Scan 00
4= L - No paper
H - Paper present Open front door and push sheet of paper
into paper path leading to the transfer
unit
Belt Entrance Switch Scan 01
1= L - Paper present
H - No paper Open front door and push sheet of paper
into paper path leading to the transfer
unit. Manually rotate the registration
roller (use the thumbwheel on the left
end of the roller) to feed the paper to the
transfer belt.
Exit Sensor Switch Scan 01
2= L - No paper
H - Paper present Toggle sensor flag behind the fuser.
Remove the fuser if necessary
Stack Full Sensor Switch Scan 01
3=
L - No paper
H - Stack full Toggle the sensor flag at the exit bin
not used Switch Scan 01
4= not used
Black Toner
Cartridge Present Switch Scan 02
1= L - Deactuated
H - Unit installed Open top cover and actuate sensor flag
next to LED head.
Cyan Toner
Cartridge Present Switch Scan 02
2= L - Deactuated
H - Unit installed Open top cover and actuate sensor flag
next to LED head.
Magenta Toner
Cartridge Present Switch Scan 02
3= L - Deactuated
H - Unit installed Open top cover and actuate sensor flag
next to LED head.
Yellow Toner
Cartridge Present Switch Scan 02
4= L - Deactuated
H - Unit installed Open top cover and actuate sensor flag
next to LED head.
Top Cover Switch Switch Scan 03
1= L - Top closed
H - Top opened Open top cover
Front Cover
Switch Switch Scan 03
2= L - Cover closed
H - Cover opened Open front cover
Waste Toner
Sensor Switch Scan 03
3= L - Not full
H - Full Remove the drum unit caddy and the
transfer belt. Locate the sensor below
the registration rollers. Interrupt the
sensor with a scrap of paper
not used Switch Scan 03
4= not used
not used Switch Scan 04 not used
not used Switch Scan 05 not used
Manual Bypass
Feeder Home
Sensor Switch Scan 06
1= L - Roller at home
H - Roller not
home Open the top cover and remove the
drum unit caddy. Manually rotate the
manual bypass feed roller by turning the
white gear on the right end of the roller.
Manual Bypass
Feeder Paper
Empty Switch Switch Scan 06
2= L - Paper loaded
H - No Paper Toggle the switch located at the
inner-base of the Manual Bypass Feeder
tray