Rover User Manual Version 3.0
38
Appendix A: Part Sourcing Summary
Battery Compartment
Source:
Repair or replacement must be done by Xeos Technologies Inc.
Only use new, approved batteries for deployments. In the event used
batteries are for short term testing, batteries must have equivalent
battery voltages to prevent reverse charge forming and subsequent
battery leakage.
Visual inspection of the battery compartment should be done after
each deployment to ensure there has been no leakage. Signs of
corrosion, leakage or water ingress should be reported to Xeos
immediately.
O-Rings
Part Number:
568-138 90D DURO BUNA (White Section)
568-137 90D DURO BUNA (Black Section)
Source:
O-rings may be purchased through Xeos Technologies Inc. or from a
variety of vendors. Please call for assistance if required.
Maintenance:
O-rings should be visually inspected prior to each deployment, no
matter how short. Any evidence of wear or stretching requires that
they be replaced.
O-rings should always be replaced after a deployment of 2 months or
more. O-rings should also be replaced after a series of short
deployments adding up to 2 months.
Seal Lubrication
Part Number:
Molykote 111
Source:
Lubrication may be purchased through Xeos Technologies Inc. or
from a variety of vendors. Please call for assistance if required
Maintenance:
Lubrication should be used each time the O-Ring is removed and
reseated
Procedure:
Squeeze a thin layer of lube onto the O-Ring. Gently spread the lube
around the O-Ring until it is completely coated. Follow instructions
for seating the O-Ring
