Xeda International CEDAX ELECTROFOG EWV10, Инструкция по эксплуатации

Страница: 39 / 84

EWV
- 37 -
TRANSPORTATION AND
HANDLING
ELECTROFOG
4.4 PACKAGED MACHINE
TRANSPORTATION AND HANDLING
Operator
qualification
Number of
operators
2
Security
measures
Machine
status
- -
The machine is transported inside a wooden box,
normally placed on a pallet, and must, therefore, be
moved with the help of a forklift truck.
WARNING
Description of lifting with forklift truck:
- Before carrying out any transport operation,
check that the load-bearing capacity of the
lifting device is suitable for the load to be lifted.
- The forklift truck must be operated by a
qualified person, skilled in this specific task.
- The handling operations by the forklift truck
should be carried out with the lifting forks
lowered as far as possible.
- The routes to be used must be suitable for the
transit of forklift trucks, with no potholes or
uneven surfaces and must, in any case, ensure
the stability of the load.
- The load must be correctly placed on the forks
of the truck to avoid any possible accidental
load losses.
The overall weight of the packaged machine allows it to
be handled manually by two operators.
4.4.a Unpacking
Upon receiving the machine, it must be checked for any
damage which may have occurred during shipment.
The machine is placed in the box with the fogging pipe
dismantled, plus a spanner to tighten the lance and a
brush used to clean any residue In the lance after use.
Proceed as follows:
- bring the packaged machine as close as possible
to the intended installation site, then carefully open
the protective packaging so as avoid damaging the
machine;
- carefully check that the content corresponds exactly
to the shipping list;
- the user must comply with the regulations in force
in the country of installation when disposing of the
packaging.
There are two grip handles ( 1 ), correctly balanced, for
use in handling the machine.
1