Xeda International CEDAX ELECTROFOG EWV10, Инструкция по эксплуатации

Страница: 22 / 84

EWV
- 20 -
TECHNICAL INFORMATION ELECTROFOG
The machine must be installed on surfaces that do
not transmit vibrations and in places where there is no
danger of collisions with other mechanical systems.
Lighting of the operating area
The machine is intended for use in enclosed places
that are properly illuminated by artificial lighting.
The machine installation area must be adequately
illuminated to eliminate any areas of shadow that may
cause disturbance, glare or hazardous strobe effects on
the moving parts due to lighting.
The average lighting value of the work area must be 500
lux.
The internal part requiring frequent inspection and
adjustment, must be fitted with suitable lighting devices;
this also applies to the maintenance areas.
2.2 TECHNICAL DATA
General technical data
Machine type Semi-automatic
Machine function
Treatment of fruit and
vegetables with Xeda
products
Noise level Less than 80 dB
Power supplies
Power supply 3x400V 50 Hz (standard)
Consumption
Model EWV10 :
12Kw – 17A
Model EWV8 :
9.5Kw – 14A
Power socket
Model EWV10 :
32A 3P+PE
Model EWV8 :
16A 3P+PE
For more information, see the attached wiring diagrams
(ch. 10).
Weight and dimensions
Length 1100 mm
Width 310 mm
Height 440 mm
Weight 38 kg
2.2.a Environmental limitations
The machine has been designed and manufactured to
work inside covered premises with limited exposure to
dust and humidity with:
- Maximum altitude: 1000 m a.s.l.
- Operating ambient temperature: + 5°C ÷ + 40°C.
- Minimum relative humidity (measured at 40°C): 50%
Rhu
- Maximum relative humidity (measured at 20°C): 90%
Rhu
- Maximum temperature (exposure not over 24 hours):
70°C