Xeda International CEDAX ELECTROFOG EWV10, Инструкция по эксплуатации

Страница: 34 / 84

EWV
- 32 -
SAFETY ELECTROFOG
3.9 DESCRIPTION OF SAFETY SIGNS
The table shows the standard version of all the safety
plates affixed to the machine; other plates could be
inserted if the machine is fitted with optional assemblies,
which this manual does not currently include.
IMPORTANT
Contact the Manufacturer for any requests
regarding special plates not included in the
following list.
ATTENTION
Take the time to familiarise yourself with these
labels. Make sure they are all legible and, for this
purpose, clean or replace those that are damaged
or otherwise illegible (both text and graphics).
Use a soft cloth, soap and water to clean the
labels. Do not use solvents, petrol, etc.
If a label is on a part to be replaced, make sure that
the new label is already or will be affixed to the
new component.
Symbol Description
Protective gloves must be worn.
A protective helmet must be worn.
Safety footwear must be worn.
Eye protection filters must be used.
A protective respirator must be used.
The procedures indicated in the use and
maintenance manual must be observed
when working on the device.
Read the instruction manual carefully
before starting the machine.
Danger of electrocution.
Danger of burns.
DANGER
It is strictly forbidden to remove the warning
plates on the machine. Cedax S.r.l. declines all
responsibility for the safety of the machine in the
event of non-compliance with this prohibition.