Xeda International CEDAX ELECTROFOG EWV10, Инструкция по эксплуатации

Страница: 35 / 84

EWV
- 33 -
SAFETY ELECTROFOG
3.10 DESCRIPTION OF SAFETY DEVICES
DANGER
It is strictly forbidden to inhibit the safety devices
installed on the machine.
- General electrical disconnector with red knob
(padlockable): the device is positioned on the
electrical panel and is used to turn the power supply
on and off. It is padlockable to prevent it from being
used by unauthorised persons and prevents the door
of the electrical panel from being opened when the
power supply is on.
- Fixed guards: prevents access to dangerous
areas of the machine. REMOVABLE HOUSING
OR HOUSING THAT CAN ONLY BE OPENED BY
CABLES are not protected by microswitches, so
when opened, they do not stop machine operation;
before opening these areas, the emergency button
should be pressed and power to the machine
disconnected to stop its movement.
3.11 RESIDUAL RISKS
Areas subject to residual hazards are areas where a
danger persists for the operator even though safety
measures and design precautions, also aimed at not
compromising the functionality of the machine, have
been adopted.
In these areas, there is a risk of accident and serious
injury if attention is not paid to the hazard warnings
affixed to the area in question (rating plates, etc.), if the
instructions provided in the manual are not respected
and due care not taken.
DANGER
Danger due to unauthorised operator conduct:
- failure to use PPE entails a source of residual
risk for the operator due to possible contact,
in particular, with potentially dangerous
products used.
DANGER
Given the high temperatures that the machine can
reach, it is advisable to check that there are no
ignition sources nearby.
DANGER
It is advisable to cordon off the work area to
prevent other operators from coming into contact
with parts of the machine that could cause burns.