xDEEP BLACK EANX, Руководство пользователя

Страница: 36 / 53

71 70
The first gas on the list is always the primary gas – there is no possibility to
deactivate it and after switching into diving mode the device automatically
recognizes it as an active gas.
For each gas in the gas list, it is possible to set the following parameters of the
breathing gas mixture:
• Status - The BlaCK eanX makes it possible to assign one of three states to
a gas
- Off (inactive)
– gas will not be included in calculations and there
is no possibility to switch to the gas while diving
- On (active) – gas will be included in calculating gas switches and
during the dive it will be indicated as one of the subsequent gases
in accelerated decompression
- Back. (Backup) – reserve gas. The device will not include this gas
while calculating gas switches but at any moment it will be possible
to force its use.
SETTINGS – LIST OF BREATHING GASES
2/4
The primary gas must have the lowest oxygen content of all set
gases. If you set a lower O2 value for a different gas, it will be
impossible to set the status of that gas as “active”.
• O2 – percentage oxygen content in the breathing gas mixture;
• ppO2 – value of oxygen partial pressure in breathing gas mixture (ppO2) at
which the Bl aCK eanX suggests switching to that gas. Value of ppO2 that can
be set between 0.5 ata and 1.6 ata.
• Switch depth – depth at which BlaCK eanX suggests switching to that gas.
SETTINGS – LIST OF BREATHING GASES
3/4
The parameters „ppO2” and „main switches” are linked together
meaning that setting either one of them results in automatic
re-calculation of the other.