xDEEP BLACK EANX, Руководство пользователя

Страница: 20 / 53

39 38
at a depth of 0.5m, before reaching the gas switching depth the device will
signal the need to switch gases in the upper line displaying the gas switching
icon with the name of the gas which shall be switched to:
The information about gas switching will be displayed for as long as the device
is not switched to the suggested optimal gas or unless you descend below the
gas switching depth.
DIVING – GAS SWITCH DISPLAY 2/2
even though the device signals gas switching, until the gas is
manually switched, it still includes in the calculations the gas you
are breathing. switch to proper gas in the computer immediately
after you physically change the regulators.
„CHanGe THe Gas”
InDICaTOr
Gas switching is performed using the function „switch gas” in the main menu
of the device. The list comprises only gases with the status set to “On” and the
primary gas.
The active gas is marked with selection icon . The gas recommended as opti-
mal is marked with gas switching icon and the cursor will be automatically
placed on it immediately after entering the gas switching menu. Gases which
at the particular depth have too high partial pressure to breathe them safely
are marked on the list in the alarm colour. after confirming the gas switch, the
BlaCK eanX will automatically return to the main screen.
DIVING – GAS SWITCHING 1/2
attention! always take into consideration that you could have
made a mistake in the gas settings. Before you start breathing the
gas always check mOD marking on the tank and never breathe the
gas below its maximum operational depth (mOD), even if the diving
computer suggests switching to that gas.
2 EAN28
aCTIVe Gas
Gas wITH TO
HIGH PPO2 FOr
CUrrenT DePTH
(alarm COlOUr)
sUGGesTeD
OPTImal Gas FOr
CUrrenT DePTH
1