xDEEP BLACK EANX, Руководство пользователя

Страница: 9 / 53

17 16
If the BlaCK eanX was used during a dive, then after completing the dive the
main screen will display the following information:
• Surface Interval – time in hours since surfacing from previous dive.
• NoFly – minimum time in hours during which you mustn’t travel by plane or in-
crease your altitude. more information on „noFly” time is available in chapter
„after dive – travelling by plane”.
• OTU – amount of OTU units that were calculated during the last dive.
The count does not include units from previous dives.
• CNS – current value of Cns% count, including Cns% units calculated during
the last dives and decrease in Cns% count resulting from surface interval.
DEVICE START-UP ON THE
SURFACE 1/2
In order to start up the BlaCK eanX on the surface, simultaneously press both
buttons briefly with 1s interval several times.
Once done, the BlaCK eanX will start up in surface mode and display the follow-
ing information:
To save battery energy, the BlaCK eanX turns off after several minutes of
non-operation.
If the device fails to start, the battery is probably discharged. In
such case, connect the charger and then start the device again.
If during the previous 48h there were situations which could
increase the risk of decompression sickness (DCs) the device will
display a warning icon. You need to read information presented
in chapter „after the dive – warning icon”.
04.06.15
16:52
Surf.time: 1:20
Mode: EANx
alerT ICOn (IF DIsPlaYeD)
BaTTerY InDICaTOr CUrrenT DaTe
CUrrenT mODe
aFTer DIVe
InFOrmaTIOn
CUrrenT HOUr
START OF DEVICE ON THE
SURFACE 2/2