xDEEP BLACK EANX, Руководство пользователя

Страница: 38 / 53

75 74
Settings >> Alarms >> Alarm clock
This function sets the alarm which is activated at a particular hour in dive
mode.
Settings >> Alarms >> ppO2
This function makes it possible to set the level of oxygen partial pressure
(ppO2) above which the alarm will be displayed. It can be set at values of 0.5-1.8
ata.
Settings >> Alarms >> CNS
This function makes it possible to configure the alarm of Cns% units count
level. The alarm will be activated during a dive if the cumulated Cns% count
reaches the set value.
SETTINGS – ALARMS 2/2
The ‘alarm Clock’ is not a classical alarm clock and does not
operate in the surface mode. This alarm is displayed only in the
underwater mode.
attention! If you are not a certified eanx (nitrox) or TmX (techni-
cal - trimix) diver, do not change the value of the ppO2 alarm.
The recommended alarm level for recreational divers is 1.4 ata.
Settings >> vSI ranges
This set of functions allows configuration of optimal and maximum ascent /
descent rates in metres per minute or feet per minute for various ranges of
depth.
In order to add a new range, select
Settings >> Ascent/descent >> Add range
and set the depth at which the range begins.
If any ranges were already determined in the device, the new range will contain
the already set depth up to the depth of the next range or the maximum depth.
example: adding a range from 18m depth will result in displaying two ranges on
the screen: 0 - 18m and 18m - max.
In this situation, adding another range starting from 6m depth will result in
displaying three ranges on the screen: 0 - 6m, 6 - 18m, 18m - max.
SETTINGS – ASCENT RATE FOR VSI
0m
0m
maX
maX
0-18m ranGe
0-6m ranGe 6-18m new ranGe 18m-maX ranGe
18m-maX ranGe