Safety and operating instructions
MAG 5, 10, 15, 24
8
© 2010 Xcalibre Equipment Limited | 67020101 | 2010-05-25
Original instructions
►
Wear washable or disposable protective clothes
at the worksite, and shower and change into
clean clothes before leaving the worksite to
reduce exposure of dust and fumes to yourself,
other persons, cars, homes, and other areas.
►
Avoid eating, drinking, and using tobacco
products in areas where there is dust or fumes.
►
Wash your hands and face thoroughly as soon
as possible upon leaving the exposure area, and
always before eating, drinking, using tobacco
products, or making contact with other persons.
►
Comply with all applicable laws and regulations,
including occupational health and safety
regulations.
►
Participate in air monitoring, medical
examination programs, and health and safety
training programs provided by your employer or
trade organizations and in accordance with
occupational health and safety regulations and
recommendations. Consult with physicians
experienced with relevant occupational
medicine.
►
Work with your employer and trade organization
to reduce dust and fume exposure at the
worksite and to reduce the risks. Effective health
and safety programs, policies and procedures
for protecting workers and others against
harmful exposure to dust and fumes should be
established and implemented based on advice
from health and safety experts. Consult with
experts.
▲
WARNING Projectiles
Failure of the work piece, of accessories, or even
of the machine itself may generate high velocity
projectiles. During operating, splinters or other
particles from the working material may become
projectiles and cause personal injury by striking the
operator or other persons. To reduce these risk:
►
Use approved personal protective equipment
and safety helmet, including impact resistant
eye protection with side protection.
►
Make sure that no unauthorised persons
trespass into the working zone.
►
Keep the workplace free from foreign objects.
►
Ensure that the work piece is securely fixed.
▲
WARNING Splinters hazard
Using the insertion tool as a hand struck tool can
result in splinters hitting the operator and can
cause personal injury.
►
Never use an insertion tool as a hand struck
tool. They are specifically designed and heat-
treated to be used only in a machine.
▲
WARNING Slipping, tripping and falling
hazards
There is a risk of slipping or tripping or falling, for
example tripping on the hoses or on other objects.
Slipping or tripping or falling can cause injury. To
reduce this risk:
►
Always make sure that no hose or other object
is in your way or in any other person's way.
►
Always make sure you are in a stable position
with your feet as far apart as your shoulders
width and keeping a balanced body weight.
▲
WARNING Motion hazards
When using the machine to perform work-related
activities, you may experience discomfort in the
hands, arms, shoulders, neck, or other parts of the
body.
►
Adopt a comfortable posture whilst maintaining
secure footing and avoiding awkward off-
balanced postures.
►
Changing posture during extended tasks may
help avoid discomfort and fatigue.
►
In case of persistent or recurring symptoms,
consult a qualified health professional.
▲
WARNING Hydraulic oil
Spilled hydraulic oil can cause burns, accidents
due to slippery conditions and will also harm the
environment.
►
Take care of all spilled oil and handle it
according to your safety and environmental
regulations.
►
Never dismount the hydraulic machine when the
hydraulic oil is hot.
►
Never run any hydraulic lines for attachment of
the hydraulic machine through the drivers cab.
▲
WARNING Hydraulic oil at high pressure
Thin jets of hydraulic oil under high pressure can
penetrate the skin and cause permanent damage.
►
Immediately consult a doctor if hydraulic oil has
penetrated the skin.
►
Never use your fingers to check for hydraulic
fluid leaks.
►
Keep your face away from any possible leaks.
