PulseStop Mode
975-0307-01-01
C–5
•
The “Delay” refers to the “Preheat to Crank Delay” and may be zero.
•
Cranking will cease when the generator run signal goes high for the
specified hold time or when the crank time has elapsed.
•
To get the ShutDown Bypass on Relay 3 with no preheat, Relay 3
must be configured for Preheat with ShutDown Bypass and have the
Preheat time set to zero.
•
StartStop mode is essentially the same as GlowStop mode with no
preheat on Relay 1.
PulseStop Mode
For generators with PulseStop mode starting types (Type 13):
•
Relay 1 (Stop) and Relay 2 (Start) can be used with a common ground
for three-wire configured generators.
•
If Relay 3 is configured for Preheat, the signal only shows up on
Relay 3.
•
The Preheat on Relay 3 will not overlap the Crank Time if ShutDown
Bypass is not enabled.
•
If the ShutDown Bypass is enabled, the Preheat on Relay 3 will
remain high for the Crank Time and for the ShutDown Bypass period
after cranking.
•
The “Delay” refers to the “Preheat to Crank Delay” and may be zero.
•
Cranking will cease when the generator run signal goes high for the
specified hold time or when the crank time has elapsed.
•
To get the ShutDown Bypass on Relay 3 with no preheat, Relay 3
must be configured for Preheat with ShutDown Bypass and have the
Preheat time set to zero.
Figure C-4
StartStop Mode Timing Diagram
Содержание XW
