Inverter Loads
445-0145-01-01
4–5
If a motor refuses to start, observe the
INPUT VOLTAGE DISPLAY
while
trying to start the motor. If the indicator drops below 11 volts while the
XPower Plus
is trying to start the motor, this low voltage condition may
be why the motor won’t start. Make sure that the battery connections are
good and that the battery is fully charged. If the connections are good and
the battery is charged, but the voltage still drops below 11 volts, you may
need to use a larger battery.
Trouble Loads
Some appliances, including the types listed below, may be damaged if
they are connected to the
XPower Plus
:
•
Electronics that modulate RF (radio frequency) signals on the AC line
will not work and may be damaged.
•
Speed controllers found in some fans, power tools, kitchen
appliances, and other loads may be damaged.
•
Some chargers for small rechargeable batteries can be damaged. See
“Precautions For Using Rechargeable Appliances” on page viii
for
details.
•
Metal halide arc (HMI) lights can be damaged.
c
CAUTION
Some equipment may be damaged by the
XPower Plus
’s modified sine
wave output.
Note
:
If you are unsure about powering any device with the
XPower Plus
,
contact the manufacturer of the device.
XPower 1200 Plus 1750 Plus.book Page 5 Friday, October 21, 2005 4:19 PM
Содержание XPower 1000 Plus
