Safety
viii
153379
This manual for use by qualified installers only
Risks
WARNING: Shock hazard
Parts of the capacitor charge will still be energized for a maximum of five minutes after
being disconnected.
Open doors only after the device is disconnected and discharged. Check whether the
device is no longer live (DC voltage) including terminals TB3 and TB4.
WARNING: Explosion hazard
The IGBT module may explode in the event of a major malfunction. The GT100 enclosure
doors should remain closed with the latches tightened, except during maintenance or
testing.
WARNING: Crush hazard
The inverters have a specific balance point that correlates to their Center of Gravity and
can topple down. Exercise care when moving the GT100.
WARNING: Amputation hazard
The inverters contain integrated ventilators including rotating ventilator wheels. Do not
place fingers in ventilator.
WARNING: Burn hazard
Inverters contain components that become hot during normal operation. Do not touch.
CAUTION: EQUIPMENT DAMAGE
The GT100 incorporates an air supply and exhaust air area, which must remain
unobstructed. The device can overheat and be destroyed if the installation instructions are
not adhered to.
CAUTION: EQUIPMENT DAMAGE
Sensitive electronics inside the GT100 can be destroyed when touched and when
electrostatically charged. Discharge via earth potential before touching and wear
appropriate protective gear.
CAUTION: EQUIPMENT DAMAGE
No connections or disconnections are to be made at the terminal strips or internal
connectors during operation.
Turn unit off before performing terminal work; wait five minutes (capacitor charge) and
recheck to ensure internal components are no longer live.
Содержание GT100 Series
