Xantrex Gateway, Руководство по установке

Страница: 56 / 80

Configuration
3–22 975-0330-01-01
To return the Gateway to its factory default settings:
1. Close the configuration web page if it is open.
2. Remove power from the Gateway by unplugging the Xanbus network
cable from the Gateway Inverter port.
3. If the Gateway was previously configured for wireless operation,
connect an Ethernet cable between the Gateway Ethernet port and
your router or computer.
4. Use a pen or small screwdriver to press and hold the Reset button.
5. While holding the Reset button, reconnect the Xanbus network cable
to the Gateway Inverter port.
6. Hold the Reset button for an additional ten seconds.
7. Release the Reset button.
8. View the Gateway configuration web page and reconfigure the
Gateway.
Power System Monitoring on the Internet
In order to view power system performance data from any location via the
Internet, you must change your router firewall settings to allow “port
forwarding.” The PORT Forward web site (
www.portforward.com ) has
collected information on how to configure port forwarding for most
popular routers.
If you want to monitor your power system on your home network only,
you do not need to change your firewall settings.
CAUTION: Network security risk
Changing your firewall settings to allow port forwarding can potentially leave
your home network open to attacks from external computers. Do not change your
firewall settings unless you are absolutely sure of how to do it correctly. The
PORT Forward web site (
www.portforward.com ) has collected information on
how to configure most popular routers.
Xantrex does not guarantee the security of your network if you follow the advice
provided at the PORT Forward web site. Use at your own risk.
www.xantrex.com.ua