Xantrex Gateway, Руководство по установке

Страница: 24 / 80

Installation
2–4 975-0330-01-01
Materials and Tools Required
The following materials and tools are required to install the Gateway.
Supplied Materials
❐
Gateway
❐
10 ft (3 m) Xanbus network cable (standard straight-through Ethernet
cable—CAT 5e)
❐
Four #6 screws
❐
Network terminators (supplied with the Gateway and the inverter).
Important:
When creating long Xanbus networks (i.e. greater than 100 m),
you must verify network integrity using a CANbus network analysis tool such as
the Maretron N2KMeter Diagnostic Tool for NMEA2000 compatible networks.
See “Verifying the Xanbus Network” on page 2–11.
Figure 2-1 Maximum Distances Between Devices (250 kbps Xanbus baud rate)
Inverter 1 Inverter n Gateway Router Personal Computer
Varies
with
router 90 m
(300 ft)
(Wireless)
40 m
(130 ft)
CAUTION: Equipment damage
Do not use crossover cable for the Xanbus network cable. On crossover cable, the
order of color-coded wires at each end of the cable is different.
www.xantrex.com.ua