Xantrex Freedom SW 815-2012, Руководство пользователя

Страница: 33 / 122

97-0019-01-01 19
Freedom Inverter/Charger Operation
If any part of this test fails, determine the cause before using the
unit.
8. Monitor the Freedom SW Front Panel.
The indicator LEDs on the front panel show you the
operating status of the Freedom SW. A description of the
LEDs is provided in Table 1.
If none of the front panel LEDs are on, see
“Troubleshooting” on page 85.
Faults and Warnings A fault affects the operation of the
unit. A manual fault requires user intervention by clearing the
condition and then pressing the
CLEAR FAULT RESET
Table 1
Front Panel LEDs
LED
Label
Color Status
Action (or Status
Item)
Inverter
ENABLED Steady
Green If utility and
generator AC is
unavailable and
operating conditions
are met, the
Freedom SW will
produce AC voltage
to power loads. You can run your
appliances from the
inverter.
Gen
Support Flashing
Green The inverter is
assisting a generator
in powering loads. You can run your
appliances from the
inverter.
AC IN Steady
Green When the Freedom
SW is connected to
a qualified AC
source or a
generator, the AC
IN LED turns on. You can run your
appliances from an
AC source like the
utility grid or a
generator.
Charging Flashing
Green Freedom SW is
connected to a
qualified AC
source, is charging
and passing power
to AC loads. Your battery bank is
being replenished
and AC loads are
receiving power.
Fault Steady
Red A fault condition
was detected on the
network. Investigate and
clear the fault
condition.
Warning Flashing
Red A warning is
detected. Investigate by
examining warning
logs on SCP.
Table 1
Front Panel LEDs
LED
Label
Color Status
Action (or Status
Item)
FSW Owners Guide.book Page 19 Tuesday, August 7, 2018 9:03 AM