Xantrex DR 1524, Инструкция по установке и эксплуатации

Страница: 7 / 84

©2000 Xantrex Technology Inc.
V
SAVE THESE INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
This manual contains important safety instructions that should be followed during the installation
and maintenance of this product.
To reduce the risk of electrical shock, and to ensure the safe installation and operation of this
product, the following safety symbols have been placed throughout this manual to indicate danger-
ous conditions and important safety instructions.
WARNING - A dangerous voltage or condition exists in this area.
Use extreme caution when performing these tasks.
AVERTISSEMENT - Une tension ou condition dangereuse existe dans cette zone.
Faire preuve d’extrême prudence lors de la réalisation de ces tâches.
CAUTION - This procedure is critical to the safe installation or operation of the unit. Follow these
instructions closely.
ATTENTION - Cette procédure est essentielle à l’installation ou l’utilisation
de l’unité en toute sécurité. Suivre ces instructions de près.
NOTE - This statement is important. Follow instructions closely.
NOTE - Cette déclaration est importante. Suivre les instructions de près.
· All electrical work must be done in accordance with local, national and/or international electrical
codes.
· Before installing or using this device, read all instructions and cautionary markings located in (or
on) the manual, the inverter, the controller, the batteries and the PV array.
· Do not expose this unit to rain, snow or liquids of any type. This product is designed only for
indoor installation.
· To reduce the chance of short-circuits when installing or working with the inverter, the batteries
or the PV array, use insulated tools.
· Remove all jewelry such as rings, bracelets, necklaces, etc., prior to installing this system. This
will greatly reduce the chance of accidental exposure to live circuits.
· The inverter contains more than one live circuit (batteries and AC line). Power may be present
at more than one source.
· This product contains no user serviceable parts. Do not attempt to repair this unit.
· Do not install 120 volt AC stand-alone inverters onto 120/240 volt AC multi-branch circuit wiring.
This could pose a fire hazard due to an overloaded neutral return wire in this configuration.